Table of Contents
Advertisement
Appendix A • Configuring Windows network settings manually for static IP address
64
1037076-0001 Revision C
6. In the General tab, select
.
address
7. In the
IP Address
field, enter an appropriate IP address from
the range of available IP addresses listed in the System
Control Center.
8. In the
Subnet Mask
9. In the
Default Gateway
10. Enter
66.82.4.8
in the Alternate DNS field. See Figure 55.
66.82.4.12
Figure 55: Entering the preferred DNS server address
11. Click OK to close the open dialog boxes and finish the
configuration.
12. Restart the computer even if Windows does not prompt you
to do so. This ensures that the network settings are
automatically reset.
Use the following IP
field, enter the LAN1 Subnet Mask.
field, enter the LAN1 IP Address.
in the
Preferred DNS server
field and
Advertisement
Table of Contents
