Disabling Web Browser Proxy Settings; Internet Explorer - Hughes HN7000S Manual

Upgrading to a remote terminal

Hide thumbs Also See for HN7000S:

Table of Contents

Disabling web browser

proxy settings

For proper installation of the HN7000S, the web browser on your

computer must be configured so that it does not connect to the

Internet through a proxy server. This section explains how to

configure the following web browsers:

• Internet Explorer on page 13

• Netscape on page 14.

Note: If you have a HughesNet Activation Software CD, you do

not have to perform the steps in this section. Proceed to

Connecting component cables on page 26.

1. Turn the computer on.

2. Open Internet Explorer.

→

3. Select

Tools

Internet Options

4. Select the Connections tab as shown in Figure 6.

Figure 6: Selecting the Connections tab

Chapter 3 • Installing the HN7000S remote terminal

1037076-0001 Revision C

Table of Contents