Using The Activation Software Cd - Hughes HN7000S Manual

Upgrading to a remote terminal

Hide thumbs Also See for HN7000S:

Table of Contents

Using the Activation

Software CD

Note: If you do not have a HughesNet Activation Software CD,

you must manually configure your PC for use with the HN7000S

remote terminal. Skip this section and proceed to Disabling web

browser proxy settings on page 13.

The HN7000S shipping carton contains a HughesNet Activation

Software compact disc (CD). The activation software verifies that

your PC meets certain hardware and software requirements and

automatically configures the PC for the HughesNet service. Use

the Activation CD as follows:

1. Make sure your PC is not connected to a network.

2. Insert the Activation CD into your PC's CD-ROM drive.

Note: If the activation software determines that your PC

does not meet the minimum requirements and it cannot

correct this situation, it will instruct you to contact Customer

Care for assistance.

3. Select the checkbox to accept the software license

agreement.

Note: If you do not accept the license agreement, you

cannot proceed with the upgrade.

Chapter 3 • Installing the HN7000S remote terminal

1037076-0001 Revision C

Table of Contents