Table of Contents
Advertisement
Chapter 4 • Completing the upgrade
50
1037076-0001 Revision C
.
Figure 42: HN7000S System Control Center home page
3. Click on the System Status indicator. The System Status
page appears as shown in Figure 43.
4. Locate the
Software Download Status
If the status in the right column reads
up-to-date
successfully registered for service and its software is current.
If
All files are up-to-date
field, the HN7000S remote terminal may still be downloading
its software from the NOC. If the message does not appear
after several minutes, follow these steps to power cycle the
HN7000S remote terminal:
a. Unplug the power supply's AC power cord from the power
source. Do not unplug the power cord from the remote
terminal.
b. Wait 30 sec.
, the HN7000S remote terminal was
does not appear in the
field.
All files are
Advertisement
Table of Contents
