Windows 2000; Network And Dialup Connections - Hughes HN7000S Manual

Upgrading to a remote terminal

Hide thumbs Also See for HN7000S:

Table of Contents

Chapter 3 • Installing the HN7000S remote terminal

1037076-0001 Revision C

5. Ensure that both the

6. Select OK to close the open dialogs and finish the

7. Restart the computer even if Windows does not require you to

Windows 2000

1. Click

2. Double-click Network and Dial-up Connections.

3. A list of network connections appears. See Figure 12. The

4. Right-click the Local Area Connection icon that represents

Obtain an IP address automatically

Obtain DNS server address automatically

selected. If not, select them.

configuration.

do so. This ensures that the network settings are

automatically reset.

Start→ Settings→ Control Panel

Local Area Connection icon must be listed. If it is not, the

network is not installed correctly.

Figure 12: Network and Dialup Connections

the HN7000S network connection and select

Local Area Connections Properties dialog appears. See

Figure 13.

and

options are

. The

Properties

Table of Contents