Table of Contents
Advertisement
Accessing the Web UI
Home page
The Hughes 4500 includes an internal Web User Interface (Web UI). To access
the Web UI, open your favourite web browser and type in the internal IP
address of the terminal. If you are using a:
• Ethernet port, type this Ethernet IP address: http://192.168.128.100
• USB port, type this Maintenance IP address: http://169.254.1.1
The Web UI opens up to the Terminal Status page. Along the top of all Web UI
pages are icons representing the categories of available subpages; Home,
Connections, Settings, Usage and Support.
The Home page shows the current terminal status and allows user to set up the
initial data connection.
On the left side of the page is the Status bar. These items are updated
automatically when the status of any item changes.
1. Connection: This field indicates whether you are registered with the EML
Network. It also shows if you are registered with the IMS and receive
signal strength.
2. Position: This field displays the current position status. If the terminal
acquired a GPS fix, it will display the Latitude, Longitude, Altitude, the last
time the GPS position was updated and the geocoordinates in the Military
Grid Reference System. Time displayed is UTC time.
3. Terminal Properties: This field indicates miscellaneous status information.
Using the Web UI
Figure 3: Terminal Status page
Chapter 3 • Using the Web UI
Chapter 3
13
H62751 Revision B
Advertisement
Table of Contents
