Dräger Polaris Multimedia Instructions For Use Manual page 45

Adjusting the gimbal mounting
The gimbal mounting is set correctly when the
display mount is stable in any position and does not
move on its own.
A
 The braking force can be adjusted on both
joints (A).
Instructions for use Polaris Multimedia
Adjusting the braking force at the joint
1 Adjust the braking force of the joint using the set
screw (A).
A
Use an Allen key (size 4 mm) for this.
 Turn the set screw clockwise to increase the
braking force.
 Turn the set screw counterclockwise to
decrease the braking force.
NOTE
Set the braking force as low as possible and as
high as necessary.
Maintenance
A
45