Appendix 3 Quick Reference For Printing - Toshiba TEC CB-416-T3-QQ Owner's Manual

Appendix 3 Quick Reference for Printing

The tables below outline the actions necessary to modify the printer settings.
1 Label Settings
Actions
Enter a name of label stock.
Specify label size (including
width and length).
Specify an amount of space
between labels.
Select the media sensor.
Make a fine adjustment (including
feed or back feed amount and cut
position).
Adjust print density.
Align colors.
Specify the type of ribbon to be
used.
Adjust the Ribbon Motor Voltage.
2 Issue Mode Settings
Actions
Specify the orientation.
Specify the print speed.
Specify either process color
printing (CMY/CMYK) or spot
color printing.
Specify the type of Ribbon Save.
Specify a cut interval.
Specify whether to perform back
feed.
Select the dithering pattern.
Specify tone (RGB).
Specify colors for the spot color
printing.
Appendix 3
Path to Find the Property Page
Page Setup (TAB) New (Button)
Edit Label Stock
Page Setup (TAB) New (Button)
Edit Label Stock
Stock (TAB) Label Gap
Stock (TAB) Sensor
Stock (TAB) Fine Adjustment
Options (TAB) Print Density Adjustment
Set (Checkbox)
Graphics (TAB)
Color Registration (Button)
Align All Colors (Button)
Device Settings (TAB)
Ribbon Type
Device Settings (TAB)
Ribbon Settings (Button)
Ribbon Motor Voltage Fine Adjustment
Set (Checkbox).
Path to Find the Property Page
Page Setup (TAB) Orientation
Stock (TAB) Print Speed (in Issue Settings)
Graphics (TAB) Spot Color Setup (Button)
Stock (TAB) Print Method (in Media Settings)
Stock (TAB) Cut (in Issue Settings)
Stock (TAB) Issue Mode (in Issue Settings)
Graphics (TAB) Dithering
Graphics (TAB) Intensity
Graphics (TAB) Spot Color Setup (Button)
Color Model
Quick Reference for Printing
Ribbon Settings (Button)
See Section...
3.3.2
3.3.2
3.6.3
3.6.2
3.6.5
3.7.2
3.4.4
3.8.1
3.8.1
See Section...
3.3.3
3.6.4
3.4.5
3.6.1
3.6.4
3.6.4
3.4.1
3.4.2
3.4.5
83