Maintenance; Testing - Toshiba TEC CB-416-T3-QQ Owner's Manual

3.8.1

Maintenance

(Cont.)
No. Ribbon Parts No
Normal Ribbon
1 BRCB109300-AB 0:Black
2 BRCB109300-AM 1:Magenta
3 BRCB109300-AC 2:Cyan
4 BRCB109300-AY 3:Yellow
5 BRCB088300-AB 0:Black
6 BRCB088300-AM 1:Magenta
7 BRCB088300-AC 2:Cyan
8 BRCB088300-AY 3:Yellow
9 BRCB068300-AB 0:Black
10 BRCB068300-AM 1:Magenta
11 BRCB086300-AC 2:Cyan
12 BRCB068300-AY 3:Yellow
13 BRBLK109A3 0:Black
14 BRMAG109A3 1:Magenta
15 BRCYN109A3 2:Cyan
16 BRYEL109A3 3:Yellow
Super Premium Ribbon
1 BRBLK109D4 0:Black
2 BRMAG109D4 1:Magenta
3 BRCYN109D4 2:Cyan
4 BRYEL109D4 3:Yellow
5 BRBLK088D4 0:Black
6 BRMAG088D4 1:Magenta
7 BRCYN088D4 2:Cyan
8 BRYEL088D4 3:Yellow
9 BRBLK068D4 0:Black
10 BRMAG068D4 1:Magenta
11 BRCYN068D4 2:Cyan
12 BRYEL068D4 3:Yellow
3.8.2

Testing

Please enter the proper value for the Ribbon Motor Voltage Fine
Adjustment according to the table below.
Set Values in Ribbon Settings
Ribbon Motor Voltage Fine
Ribbon Type
Set
Normal (109)
Normal (109) x
Normal (68) x
Premium (109) x
Premium (109) x
Premium (109) x
Premium (68) x
Feed
Click Feed to advance the label or tag.
Reset
Reset is not available for this model.
Cut
Click Cut to feed and cut a label and tag.
Print Test Label
See Section 3.9.1 for further information.
Check Print Head
Click Check Print Head to begin running the printer's built-in head test.
Click the Head down arrow to select the print head to check.
Mark the Specify Range checkbox to specify the range for the print
head check.
Click OK to start checking the print head.
If there are problems with the print head, an error message will appear
on the printer's Message Display, and the print head must be replaced
right away.
Adjustment
Rewind Back Tension Necessity of Cool
Motor Motor Release Enhancement
0 0
(Hot Release Ribbons)
-10 to -20 0
(Hot Release Ribbons)
-15 -5
(Hot Release Ribbons)
-20 -10
(Cold Release Ribbons)
-20 -10
(Cold Release Ribbons)
-10 to -20 0
(Cold Release Ribbons)
-20 -10
(Cold Release Ribbons)
Chapter 3
Remarks
Available Media
Width (mm)
Width (mm)
No 109 85 to 110
No 88 65 to 85
No 68 45 to 65
Yes 109 85 to 110
Yes 109 85 to 110
Yes 88 65 to 85
Yes 68 45 to 65
Printing
59