Installing The Ribbon Tension Sheet - Toshiba TEC CB-416-T3-QQ Owner's Manual

2.8.4 Installing the Ribbon
Tension Sheet
Note:
Do not reinstall the Ribbon guide
Lever, Ribbon Guide Lever Shaft and
the D-3x6 screw because they are not
used after the ribbon tension sheet
has been installed.
1 Remove the Ribbon Guide Lever from the Ribbon Cassette by
removing the screw.
2 Fit the bosses on the Sheet Fixing Plate into the holes of the Ribbon
Tension sheet and the aluminum frame. Secure them with the
three D-3x5 screws.
Ribbon Cassette
D-3x5
Bosses
(A)
Ribbon Tension Sheet
(A)
Chapter 2 Printer Installation
Aluminum Frame
Ribbon Guide Level
D-3x6
Sheet Fixing Plate
(B)
(B)
Ribbon Guide
Level Shaft
27