Table of Contents
Advertisement
A1.3.1 Media Type (Cont.)
A1.3.2 Detection Area of the
Transmissive Sensor
Note:
This printer does not support a roll
of tags with round holes.
76
The formula below shows the relation between paper roll length and
paper core diameter.
L : Paper length
D : Paper roll diameter
d : Paper core outside diameter
t : Paper thickness
( = 3.14...)
For calculation, the units of the factors must be the same.
The Transmissive Sensor is movable from the center to the left edge
of media.
The Transmissive Sensor detects a gap between labels, as illustrated
below.
Area to be detected
Sensor Position
Min. 12mm
The Transmissive Sensor detects a hole on a roll of tags, as illustrated
below.
Rectangular Hole
Sensor Position
Min. 12mm
Appendix 1
2
2
( D
- d
)
L =
4 t
Center of Media
Label
Gap
Label
Sensor Movable
within this range
Center of Paper
Sensor movable
within this range
Specifications
Image printed
on this side
Media Feed
Direction
Image printed
on this side
Media Feed
Direction
Advertisement
Table of Contents
