Toshiba TEC CB-416-T3-QQ Owner's Manual page 21

2.5 Loading the
Media (Cont.)
Note:
When inserting a roll of labels or
tags, push on the media core only.
Otherwise, core material drags
against the Supply Shaft causing
telescoping of the media supply roll.
CAUTION!
To remove the Supply Roll
Holder (outside), turn it to
disengage the claw from the
notches. Otherwise, the claw or
the notches may be damaged.
See Section 2.5.1 for more
detail.
11 Based on width of the media measured in Step 10, push the media
into the Supply Roll Holder (inside), and place it with reference
to the marks on the Supply Shaft.
Loading a roll of labels
Loading a roll of tags
12 Slide the Supply Roll Holder (inside) to the loaded media.
13 Slide the Supply Roll Holder (outside) to the loaded media.
Notches
Supply Shaft
Chapter 2 Printer Installation
Supply Shaft
Labels
Supply Shaft
Tags
Supply Roll Holder
Claw
Supply Roll Holder
(Outside)
13