Toshiba B-850 Owner's Manual page 85

APPENDIX 4 SYSTEM MODE
A4.4 Printer Parameter
Fine Adjustment
(Cont.)
X Axis Fine Adjustment
(Example)
NOTES:
The X Axis fine adjustment is
performed to fine adjust the
print position in horizontal
direction (left or right).
Adjust the X axis within the
effective print range. After
the value reaches the
coordinate 0, the value
remains unchanged even if
the subsequent fine
adjustment is performed in
the negative direction.
This adjustment cannot be
used in the Self Test mode or
Test print.
The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
parameter. The maximum X
axis fine adjustment value is
99.5mm. When the value
reaches the maximum, the
value remains unchanged
even if the subsequent fine
adjustment is performed.
X Axis Fine Adjustment
With this parameter you can fine adjust the print position on X Axis.
When "<3>ADJUST SET" appears, press the [PAUSE] key 4 times.
[RESTART]
[FEED]
[FEED] key: Pressing the [FEED] key one time causes a –0.5mm
change, up to –99.5 mm.
[RESTART] key: Pressing the [RESTART] key one time causes a
+0.5mm change, up to +99.5 mm.
After completing the fine adjustment, press the [PAUSE] key.
A4- 9
EO1-33029
A4.4 Printer Parameter Fine Adjustment