Stock Tab - Toshiba B-850 Owner's Manual

3. PRINTER OPERATION
3.4.7 Bar Fonts Tab (Cont.)
NOTE:
Pressing the Help button on the
Bar Code Font property page
will access additional informa-
tion concerning each of the
above bar font properties

3.4.8 Stock Tab

Symbol Type. Used to specify the type and level of error correction to
use. (Used with Data Matrix only.)
Character Set. Used to specify the allowable characters for data.
(Used with Data Matrix only.)
Use Prefix. Used to add a prefix to a bar code. (Used with Data
Matrix only.)
Shape. Used to specify whether the bar code will print in the shape of
a square or a rectangle. (Used with Data Matrix only.)
.
White on Black. Used to reverse the bar code so that it prints white
on a black background. (Used with Data Matrix only.)
Mode. Used to specify one of the different modes MaxiCode supports.
(Used with MaxiCode only.)
Zipper Block. Used to specify whether or not a MaxiCode zipper
block will print with the bar code. (Used with MaxiCode only.)
Contrast Block. Used to specify whether or not a MaxiCode contrast
block will print with the bar code. (Used with MaxiCode only.)
Stock Properties, one of the most important property setting pages. This
page allows the selection of media settings (Ribbon use, sensor type, and
label gap length), issue settings (batch or strip mode, cutter use, and print
speed), as well as fine adjustments (feed length, backfeed length, cut strip
position, and print shrinkage).
After pressing the Stock button, the following screen display will
appear.
3.4 Using the B-852 Printer Properties Menus
3-24
EO1-33029