Toshiba B-850 Owner's Manual page 43

3. PRINTER OPERATION
3.4.4 Regional Settings Tab
(Cont.)
NOTES:
If displaying the driver in a
language other than the system
default is desired, choose the
language here. Changes to the
language will not take effect
until the dialog is closed and
opened again.
For a language to list here,
there must be a driver
translation in that language
and it must be supported by
the current operating system.
Languages requiring double-
byte character sets, such as
Japanese or Chinese, may not
be available unless running
under the corresponding
version of Windows.
NOTES:
It is possible to specify a
value in another system of
measurement by typing the
desired units after the name.
For example, if the driver is
set to inches, simply type
"3.5 cm" into any edit
control and it will be
automatically converted into
"1.38 in".
The "Use System Default"
selection will use the system
of measurement that is
currently selected in
Windows Control Panel's
Regional Settings.
Language Selection - By clicking on the arrow in the Language: scrolling
text box, the following screen will appear to allow selection of the desired
language to be used in the printer driver property screens.
Measurement System Selection - By clicking on the arrow in the
Units: scrolling text box, the following screen will appear to allow the
selection of the desired units of measurement.
3-16
3.4 Using the B-852 Printer Properties Menus
EO1-33029