Toshiba B-850 Owner's Manual page 21

2. PRINTER SETUP
2.7.3 Loading Media into the
Printer (Cont.)
10. After loading the media, don't forget to move the Supply Holder
Unit to the forward notches of the Supply Roll Frame as shown
below.
Forward Notch
11. If you are using labels or thick tag paper, then it may be necessary to
increase the head pressure by lowering the Head Pressure Adjust
Lever in the figure below.
Head Pressure Adjust Lever
NOTE: Head Pressure Adjust Lever Position
Lever position Head pressure
UP
DOWN
When using full width media, be sure to turn the Head Pressure Adjust
Lever to DOWN, regardless of the thickness.
For all kinds of media except the full width media, turn the Head Pressure
Adjust Lever to UP, if the print quality is to be ensured.
If the print tone is light when using thin tag paper, turn the Head Pressure
Adjust Lever to DOWN.
2-11
Available media
Thin tag paper
Low
Narrow media
Label
Thick tag paper
High
Wide media
Full width media
EO1-33029
2.7 Loading the Media
UP
DOWN