Table of Contents
Advertisement
Limit
This function lets you select the amount by which an
over-long fax is to be reduced.
1 Press MENU and 334. The display shows 34
REDUCTION.
2 Press START/COPY and use u to select
THRESHOLD.
3 Press START/COPY use u to select a value
between 0 and 30 mm.
4 Press START/COPY and then STOP three times.
Memory
If there is no paper in the paper tray or if the toner is
empty, incoming faxes will be stored in memory (around
120 pages according to Slerexe letter). If an incoming
fax has been stored in memory the display will show
FAX IN MEMORY. Once the paper tray is refilled or the
toner replaced all the faxes stored in memory can be
printed out (see Printing from memory).
When a fax has been printed it is deleted from memory.
If printing is interrupted all the faxes that have not yet
been printed in full remain in memory. Once the memory
is full no further pages can be stored.
Printing later
You can choose whether faxes are to be printed
immediately from memory or later.
1 Press MENU, 333. The display shows 33 ME-
MORY MODE. Press START/COPY.
2 Use u to select PRINT NOW (faxes are printed
out as soon as the paper tray is refilled) or PRINT
LATER (faxes are printed out when you want).
3 Press START/COPY and then STOP twice.
Printing from memory
If there is a document in memory the display will show
FAX IN MEMORY.
1 Press MEMORY and 3.
2 Press START/COPY. If faxes are stored they will
be printed out.
Sending from memory
You can scan in documents, store them in memory
and send them from memory. When they have been
sent, the faxes are cleared from memory.
1 Place the document to be faxed (maximum of 15
sheets) loosely in the document feeder, face down.
2 Press MEMORY, 2 and START/COPY.
a If you want to sent the fax immediately, select 1
NOW and press START/COPY.
b If you want to send the fax later select 2 LATER,
and press START/COPY. Enter the time you want
to send it (within 24 hours, e.g.18 30 for 6.30
pm) and press START/COPY.
3 Enter the fax number and press START/COPY. The
document will be scanned and sent.
Canceling
1 Press MEMORY, 4 and START/COPY. The
display shows ARE YOU SURE?
2 Press START/COPY to delete the faxes from
memory.
If the line is busy, automatic redial is activated.
1 If you wish to cancel automatic redial, press MENU,
774 and then START/COPY.
2 Press START/COPY again to confirm.
D A power failure will clear the faxes from memory.
Clearing memory
With this function you can delete faxes or documents
from memory.
1 Press MEMORY, 4 and START/COPY. The
display shows ARE YOU SURE?
2 Press START/COPY to delete the faxes from
memory or press STOP to cancel.
Broadcast
You can send the fax either to a group you have already
stored or to individual numbers.
1 Place the document to be faxed (maximum of 15
sheets) loosely in the document feeder, face down.
2 Press MEMORY and 2. The display shows 2
BROADCAST. Press START/COPY.
a If you want to sent the fax immediately, select 1
NOW.
b If you want to send the fax later select 2 LATER
and press START/COPY. Enter the time you want
to send it (within 24 hours, e.g. 18 30 for 6.30
pm) and press START/COPY.
3 The display shows: dial num: group. Enter the
recipients:
19
Advertisement
Table of Contents
