Kenwood FDP64 Instructions Manual page 5

safety
Read these instructions carefully and retain for future reference.
l
Remove all packaging and any labels.
l
If the cord is damaged it must, for safety reasons, be replaced by
l
KENWOOD or an authorised KENWOOD repairer.
The blades and discs are very sharp, handle with care. Always hold by
l
the finger grip at the top, away from the cutting edge, both
when handling and cleaning.
DO NOT process hot ingredients.
l
Do not lift or carry the processor by the handle - or the handle may break
l
resulting in injury.
Always remove the knife blade before pouring contents from the bowl.
l
Keep hands and utensils out of the processor bowl and blender goblet
l
whilst connected to the power supply.
Switch off and unplug:-
l
before fitting or removing parts;
when not in use;
before cleaning.
Never use your fingers to push food down the feed tube. Always use the
l
pusher/s supplied.
Never fit the blade unit to the power unit without the blender
l
goblet or compact chopper/grinder fitted.
Before removing the lid from the bowl or blender or compact chopper/
l
grinder from the power unit:-
switch off;
wait until the attachment/blades have completely stopped;
be careful not to unscrew the blender goblet or compact chopper/
grinder from the blade assembly.
Do not use the lid to operate the processor, always use the on/off speed
l
control.
This appliance will be damaged and may cause injury if the
l
interlock mechanism is subjected to excessive force.
Always unplug your food processor when not in use.
l
Never use an unauthorised attachment.
l
Never leave the appliance unattended when it is operating.
l
Never use a damaged appliance. Get it checked or repaired: see 'service
l
& customer care'.
Never let the power unit, cord or plug get wet.
l
Do not let excess cord hang over the edge of a table or worktop or touch
l
hot surfaces.
2