Optical Systems Design OSD2251P Series Operator's Manual page 33

OPTICAL SYSTEMS DESIGN
NODE IP SET - <node_ip_set>
FIGURE 32: NODE IP SET
This command line enables the user to setup the IP of the node with the given MAC address.
Correct entry format is as follows (MAC, IP, mask and gateway address specified below is an
example);
node_ip_set 00:26:dc:00:1e:28 192.168.0.99 255.255.255.0 192.168.0.1
NODE ALL SET - <node_all_set>
FIGURE 33: NODE ALL CHECK
This command line enables the user to setup the IP for all nodes on a ring/bus.
Correct entry format is as follows (MAC, IP, mask and gateway address specified below is an
example);
node_all_set 192.168.0.99 255.255.255.0 192.168.0.1 2
DOC ID: 10115304
PAGE 33
OSD2251P OPERATOR MANUAL