RFID Reader Board
1.
Remove the
Top Cover.
2.
Disconnect the ribbon cable from the RFID Reader Board.
3.
Disconnect the 4 RFID Antenna connectors from the RFID Reader Board.
4.
Remove the 2 (metal, 6 mm) screws that secure the RFID Reader Board Cover to the top of the LED Assembly.
5.
Flip the cover over, and then remove the 2 (metal. 6 mm) screws that secure the RFID Reader Board to the cover.
RFID Antenna
1.
Remove the
Top Cover.
2.
Disconnect the affected RFID Antenna connector from the RFID Reader Board.
3.
Release the 2 hooks that secure the antenna to the LED Assembly by reaching between the LED Heads and
squeezing the antenna hooks.
RFID Reader Board Cover
RFID Antenna
RFID Antenna
RFID Reader Board
RFID Reader Board Connector