Oki ES3640MFP Component Replacement Manual page 20

Eject Assembly
The Eject Assembly uses rollers, solenoids, sensors, and diversion gates to handle media exiting
the Fuser.
Eject Assembly
Eject Assembly components
• Exit Gate - The Exit Gate switches the paper path. When the Exit Gate is in its
resting position, paper is fed to the Top Output Tray. When it is lowered by
the Exit Gate Solenoid, paper is fed to the Side Output Tray or Duplex Unit.
• Exit Gate Solenoid - Switches the paper discharge path between the Top and
Side Output Trays.
• Side Output Tray Full Stack Sensors - These sensors use an actuator to detect
when the Top or Side Output Tray is full.
• Fuser Exit Sensor - The Fuser Exit Sensor detects whether paper remains in
the output rollers.
• Door Detect Sensor - Detects whether the Door is open or closed.
• Side Output Tray Detect Sensor - Detects whether the Side Output Tray is
open or closed.
• Offset Home Position Sensor - The Offset Home Position Sensor detects the
roller position.
• Job Offset Trailing Edge Sensor - Detects the trailing edge of the media as it
leaves the Eject Assembly.
• Exit Rollers - Driven by the Fuser Motor, the Exit Rollers transport media from
the Fuser through the Eject Assembly.
• Duplex Gate - Actuated by the Duplex Gate Solenoid in the Duplex Unit, the
Duplex Gate directs media through the upper portion of the Duplex Unit and
returns it to the Registration Assembly for printing on side 2.
include: