Tray 1 Paper Registration Motor
1.
Remove the
Tray 1 Paper Feed Unit.
2.
Release the motor harness from the clamp.
3.
Disconnect the Registration Motor connector from the harness.
4.
Remove 2 (metal, 6 mm) screws that secure the Registration Motor to the Feeder.
Tray 1 Paper Feed Motor
1.
Remove the
Tray 1 Paper Feed Unit.
2.
Release the motor harness from the clamp.
3.
Disconnect the Feed Motor connector from the harness.
4.
Remove 2 (metal, 6 mm) screws that secure the Feed Motor to the Feeder.
Tray 1 Paper Lift Motor
1.
Remove Tray 1.
2.
Open the Top Cover.
3.
Remove the
Right Rear Cover.
4.
Remove the
Card Cage Fan Duct.
5.
Remove the
LVPS.
6.
Disconnect the Lift Motor connector from the Motor Driver Board.
7.
Remove the 2 (metal, 6 mm) screws that secure the Lift Motor to the frame.