Riello RESIDENCE KIS Series Installer And User Manual page 40

RESIDENCE
9.4 Keyboard lockout function
Pressing buttons 1+3 for at least 2sec activates the key lockout; pressing
buttons 1+3 again for at least 2sec re-activates the key.
The display will show <<KEY LOCKED>>.
+
Key 2 can stay active if there is a fault to allow the alarm to be reset.
9.5 Interface Stand by
Usually, when there are no faults or heat requests, the display always
shows the temperature measured by the flow sensor
If within 10 seconds there is no heat request without any key being pressed
the interface goes into stand by.
The display shows the current time, the two points separating the time from
the minutes blink with a frequency of 0.5sec ON and 0.5sec OFF, while the
status icons will be active if necessary:
40
+
RESET MENU
1 3
9.6 OTBus remote control connection
When an OTBus remote control is connected to the system, the boiler display
shows the following screen:
In particular on the boiler display:
- it is no longer possible to set the boiler OFF/WINTER/SUMMER status (it
is set by the OTBus remote control)
- it is no longer possible to set the domestic hot water setpoint (it is set by
the OTBus remote control)
The domestic hot water setpoint is displayed in the INFO menu.
The combination of the A+B keys remains active for the setting of the
DOMESTIC HOT WATER COMFORT function.