Access To The Parameters - Riello RESIDENCE KIS Series Installer And User Manual

3.21 Access to the parameters

Pressing the MENU key for at least 2 sec provides access to the settings
menu, allowing the parameters to be programmed.
If the menu is empty, <<EMPTY MENU>> is displayed, otherwise the first
item in the menu appears.
Access to the TECHNICAL parameters programming menu is password
protected; pressing MENU a second time for at least 2sec, PWD is
displayed blinking with a frequency of 0.5sec ON and 0.5sec OFF for 2sec.
Then <<0000>> is displayed blinking with a frequency of 0.5sec ON and
0.5sec OFF; the icons ,
to be entered.
There are two levels of access to the parameters:
- INSTALLER
- SERVICE
(the user level does not require a password).
Set the password supplied by the manufacturer for the desired access level
using the button at the ,
Press the key A at the arrow to confirm.
Pressing key B at the arrow returns you to the previous level, exiting the
settings menu.
, and come on to allow the password
arrows to enter the value.
It is now possible to navigate the menu using the C and D arrow keys,
confirming access to the sub-menu with arrow key A or else returning to the
previous level using arrow key B.
Note: The ERR message indicates that the selected menu item or parameter
are not available for the boiler model you are using:
Prolonged pressure at any point of the menu (>2sec) of the
you to the main page.
The interface also reverts automatically to the main screen if no key is
pressed within 60sec.
ENGLISH
key returns
15