Table of Contents
Advertisement
Tire Changer components include:
•
Turntable. Holds the Wheel.
•
RimGuard™ Wheel Clamps. Hold the Wheel in place on the Turntable. Feature multiple clamp
positions and polyurethane inserts that will not scratch or mar Rims when clamping externally.
•
Tilt-Back Tower. Holds the Mount/Demount Head; tilts back so you can move it out of the way.
•
Mount/Demount Head. Mounts and demounts Tires. The Tire Changer comes with two
Mount/Demount Heads, one alloy-steel and one plastic polymer.
•
Adjustment Handle. Controls the Tilt-Back Tower.
•
Bead Breaker. Breaks the Beads of Tires before you demount them. Includes a Handle, Blade,
and adjustable Mechanism to fit Tires of different sizes. Needs partial installation.
•
Bead Lifting Tool. A Tire Iron you use to pull the Bead edge of a Tire over the Mount/Demount
Head so the Tire can be demounted from the Wheel.
•
Pressure Gauge. Shows the amount of air pressure in a Tire to which the Air Chuck is attached.
Includes an Air Chuck with self-gripping clip.
•
Turbo-Blast™ Bead Sealer. Uses a burst of air pressure to help seal a difficult Bead.
•
Inflation Foot Pedal. Controls putting air into a Tire. On left side of unit, not the front.
•
Tilt Back Foot Pedal. Press and release to move the Main Tower to the opposite position: if up,
moves it back; if back, moves it up.
•
Clamps Foot Pedal. Moves the Clamps to the opposite position. If Clamps are in, moves them
out; if Clamps are out, moves them in.
•
Bead Breaker Foot Pedal. Moves the Bead Breaker Blade in; release to retract.
•
Turntable Foot Pedal. Rotates the Turntable. Press down and hold to rotate the Turntable
clockwise, press up and hold to rotate the Turntable counter-clockwise.
•
Regulator/Filter and Lubricator. Control and route the incoming air.
•
Left Assist Tower. Holds several tools to aid in mounting and demounting Tires.
•
Right Assist Tower. Holds other tools to aid in mounting and demounting Tires.
•
Assist Tower Controls. Raise and lower the Assist Tower Arms. One per Assist Tower.
•
Restraint Cone. Holds a Wheel in place during inflation or presses down on a Wheel to assist
with external clamping.
•
Bead Roller. Holds down Tire Sidewall during mounting; stays in one spot.
•
Assist Tool. Holds down Tire Sidewall during mounting; moves with the Tire.
•
Helper Discs. Hold up Tires during demount.
•
Dual Roller Rods. Hold up Tires for demounting, hold down Beads for mounting.
•
Storage Cabinet. For storing things you want to have nearby. Comes uninstalled.
Tire Changer accessories include:
•
Lube Bucket. Holds Tire Lubricant.
•
Lube Brush. Spreads the Lubricant.
•
Extra Air Line Parts. Provided in case they are needed in the future.
•
Extra Foot Pedal Parts. Provided in case they are needed in the future. Come in a bag in the
Storage Compartment under the Tray.
•
Extra Yellow Plastic Pieces. For the alloy steel Mount/Demount Head. Provided in case they
are needed in the future. Come in a bag in the Lube Bucket.
R80EX Tire Changer
7
P/N 5900087 — Rev. B — Jan. 2020
Advertisement
Table of Contents
