Table of Contents
Advertisement
The following graphic shows the two locations for the Adjustment Pin.
Not necessarily to scale. Not all components shown.
To use the Adjustment Pin
Bead Breaker Mechanism over until you can see the other hole, then put the Adjustment Pin into
the other hole.
Bead Lifting Tool
Use the Bead Lifting Tool to pull the Tire's Bead up and over the Mount/Demount Tool to help
demount the Tire.
You can also use the Bead Lifting Tool to push down the Tire's Bead — to the left of the
Mount/Demount Head — during the mounting of a Tire.
The Bead Lifting Tool has an angled and a hooked end. You can use either end.
R80EX Tire Changer
: remove it from its current location, slide the Blade end of the
35
P/N 5900087 — Rev. B — Jan. 2020
Advertisement
Table of Contents
