Ranger R80EX Installation And Operation Manual page 52

7. Push the side of the Tire furthest away from the Mount/Demount Head down over that side of the
Rim and Wheel as far as it will go.
8. Press down on and hold down the Turntable Foot Pedal.
The Turntable will turn clockwise and the bottom Tire Bead will drop over the top of the Rim.
9. Put the
Side view. Not necessarily to scale.
10. Position the Assist Tool, if desired, to the left of the Mount/Demount Head (about 20% of the total
distance around the Tire), with it pushing down on the Sidewall of the Tire.
Then position the Bead Roller, if desired, to the left of the Mount/Demount Head, with it also
pushing down on the Sidewall of the Tire.
Top view. Not necessarily to scale.
When you start rotating the Tire, the Assist Tool, if used, moves with the Tire. The Bead Roller, if
used, stays in the same spot.
R80EX Tire Changer
top Tire Bead over the Mount Lip and under the Demount Lip.
52
P/N 5900087 — Rev. B — Jan. 2020