Table of Contents
Advertisement
Turbo-Blast™ Bead Sealing System
The Turbo-Blast Bead Sealing System, located on the back of the Tire Changer, provides a very strong
blast of pressurized air that is useful for sealing a stubborn bead.
The system includes:
•
Pressurized Air Tank. Holds the pressurized air, enough for multiple blasts of pressurized air.
•
Intake Valve with Shutoff Lever. When the Lever is open, air from the incoming air source
goes into the Pressurized Air Tank. When closed, no air can get into the tank.
•
Pressure Relief Valve. Releases air pressure from the tank if the pressure gets too high.
•
Hose. Moves the pressurized air from the tank to the Nozzle.
•
Nozzle. Where the pressurized air comes out.
⚠
DANGER
•
Handle. Gives you an easy way to position the Nozzle.
•
Button. Press to release a powerful blast of air.
Side view. Not necessarily to scale. Not all components shown.
R80EX Tire Changer
Use extreme care with the Turbo-Blast Bead Sealing System. You could cause
product damage, personal injury, or death. Never point the Nozzle at a person or
Only use the Turbo-Blast System to seal a Bead; no exceptions
thing.
Use both hands
36
.
P/N 5900087 — Rev. B — Jan. 2020
!
Advertisement
Table of Contents
