Table of Contents
Advertisement
14. Take the Bead Lifting Tool, put it on the outside of the Demount Lip, then slide it down past and
under the bottom Bead.
Getting the Bead Lifting Tool into position may be trickier this time, as the rest of the Tire could be
in the way as you are trying to get access to the bottom Bead.
Side view. Not necessarily to scale. Helper Disc location is adjustable.
15. Push the Bead Lifting Tool towards the middle of the Wheel in an arc, pulling the bottom Bead over
the Demount Lip of the Mount/Demount Head.
16. While continuing to hold the Bead Lifting Tool, press down and hold down the Turntable Foot
Pedal to move the Turntable clockwise.
Watch the bottom Bead to make sure it is being pushed over the top of the Rim as the Turntable
moves.
17. Keep turning the Turntable until the entire bottom Bead moves over the top Rim.
The Tire is now dismounted and can be removed.
R80EX Tire Changer
49
P/N 5900087 — Rev. B — Jan. 2020
Advertisement
Table of Contents
