Ranger R80EX Installation And Operation Manual page 15

Installing the Storage Cabinet
The Storage Cabinet comes uninstalled. This section describes how to install it.
To install the Storage Cabinet:
1. Remove the two Socket Head Cap Screws, Lock Washers, and Flat Washers.
They come installed
washers.
2. Move the Storage Cabinet into place on the left side of the Left Assist Tower, with the holes in the
side of the Storage Cabinet lined up with the holes in the side of the Left Assist Tower.
3. Insert the two Socket Head Cap Screws, Lock Washers, and Flat Washers that you just removed
through the holes in the side of the Storage Cabinet and into the holes in the Left Assist Tower.
4. Firmly tighten the two Socket Head Cap Screws using a 6 mm hex key.
R80EX Tire Changer
in place
on the left side of the Left Assist Tower. Make sure to take off both
15
P/N 5900087 — Rev. B — Jan. 2020