Ranger R80EX Installation And Operation Manual page 23

Prepare the Lube Bucket
The Tire Changer comes with a Lube Bucket (to hold Tire Lubricant) and a Lube Brush (to apply Tire
Lubricant).
BendPak Ranger does not include any Tire Lubricant with the Tire Changer, as there are many options
available.
⚠
CAUTION
Be sure to use enough Tire Lubricant without using too much. The point of Tire Lubricant is to
temporarily
a Tire Lubricant that is slippery when wet but not slippery once dried. If you notice excessive amounts
of Tire Lubricant, on the Tire or Rim, remove the excess.
There is a location on the Tire Changer specifically for the Lube Bucket.
Top view. Not necessarily to scale. Not all components shown.
R80EX Tire Changer
Only use Tire Lubricant that is approved by the Tire manufacturer for the Tire you
are changing. Using non-approved Tire Lubricant could corrode the Wheel or cause
Tire/Wheel slippage and vibration issues.
reduce the friction between the Tire Bead area and the Rim. What you are looking for is
23
P/N 5900087 — Rev. B — Jan. 2020