Advertisement
Available languages
Available languages
FRONT
AVANT
FRONT
AVANT
#
The line drawings on page 33 and 34 show the
proper routing of the control cables and wir-
ing. Refer to drawings in addition to following
the instructions carefully.
A: Front brake cable
B: Throttle cable
C: Left switch wiring harness
HANDLEBAR PAD
Install the handlebar pad to the handlebar reinforcing
bar.
NOTE:
Cut the strap as shown in the photograph.
The "SUZUKI" logo should face the backward.
A: Handlebar pad
B: Strap L:145 mm
C: "SUZUKI" logo
Lift the rear of the vehicle with a hoist, then raise the
vehicle front and pull the crate base rearwards.
Place a wooden block or the like under the frame.
REAR WHEEL
When installing the rear wheels onto the axles, spe-
cial attention must be paid to the arrow of the rota-
tional direction on the tire sidewall. When the tires are
properly installed, the arrows must indicate forward
rotation of the wheels.
7
Advertisement
