Advertisement
Available languages
Available languages
After charging the battery, install the battery in the
vehicle as follows.
!
When attaching the wiring harness battery
leads to the battery terminals, observe the cor-
rect polarity.
NOTE:
The terminal bolts and nuts are attached to the
battery.
1. Replace the battery at the original position.
+ + + + lead to the
2. First connect the
of the battery.
+ + + + terminal with rubber boot.
3. Cover
- - - - lead to the
4. Connect the
the battery.
+ lead
A:
- lead
B:
C: Rubber boot
ENGINE OIL
!
This vehicle is shipped from factory with the
engine filled with engine oil. Be sure to check
oil level.
The engine oil tank located under the seat. Check the
oil level. If oil level is low, pour engine oil into the oil
tank.
NOTE:
Use SUZUKI CCI or CCI SUPER oil. If they are
not available, use a good quality 2-stroke
engine oil rated FC under JASO classification.
Engine oil tank capacity: 1.2 L (0.3/0.3 US/lmp gal)
A: Engine oil tank cap
23
+ + + + positive terminal
- - - - negative terminal of
Advertisement
