Suzuki LT80K4 Setup Manual page 20

SERVICING
REMOVING THE SEAT
Pull the seat release lever toward the rear and
remove the seat.
A: Seat release lever
BATTERY
Filling electrolyte
Remove the aluminium tape sealing the battery elec-
trolyte filler holes.
A: Aluminium tape
B: Electrolyte filler hole
Remove the caps from the electrolyte container.
NOTE:
Use the removed caps as the sealed caps of
battery filler holes.
Do not remove or pierce the sealed areas of
the electrolyte container.
A: Caps
B: Sealed area
With just enough force to break the nozzle seal of
electrolyte container, push each nozzle of the electro-
lyte container into the battery's electrolyte filler ports
and hold the container firmly so that it does not fall.
Take precaution not to allow any of the fluid to spill.
A: Electrolyte containers
19