Siemens LME7 Series Basic Documentation page 56

Key to phases
Building Technologies Division
Infrastructure & Cities Sector
Phase Function
number
LOC Lockout shutdown phase
OFF Standby, waiting for heat request
oP1/oP:P1 Operation
10 Home run
21 Safety valve ON, air pressure switch in no-load position
Check if POC is closed
22 Part 1: Fan motor ON
Part 2: Specified time air pressure switch
Message (timeout), stabilization of air pressure switch
30 Part 1: Prepurge time without flame simulation test
Part 2: Prepurge time with flame simulation test (2.1 seconds)
38 Preignition time
40 Postignition time, parameter 257 + 0.3 seconds
42 Flame detection
44 Interval: End of ignition safety time and fuel valve 1 ON
50 Part 1: Interval: Fuel valve 1 ON and pilot valve OFF
Part 2: Response time
74 Postpurge time
90 Pressure switch-min open → safety shutdown
Basic Documentation LME7...
11 PME71.402...
56/245
CC1P7105en
29.11.2011