Uwatec A1 Quick Use Manual

Your A1 is powered by a CR2450 battery
Your A1 is powered by a non-rechargeable coin cell battery.
❚
Always check the battery level before each dive.
❚
If the battery warning appears, have the battery replaced.
❚
When your A1's battery reaches the end of its lifetime, it is recommended to be replaced by an authorized
To locate your nearest service center, visit http://www.scubapro.com/where-to-buy
Do not open your A1 or try to replace the battery yourself!
Opening the housing or the metal caseback of your A1 will void your warranty.
Changing the battery must be done with particular care in order to prevent water from seeping into the dive computer.
The A1's warranty does not cover damages due to the improper placement
of the battery, or the incorrect closing of the
For more information and to view this card in other languages, visit http://www.scubapro.com
WARNING!
SCUBAPRO service center.
caseback.
A1 Quick Use Guide
Initial activation: The A1 is delivered in deep sleep mode where the display is off.
You must activate the A1 with a press-and-hold of the bottom left (SEL/ESC) button before the first dive.
Set Time ›
›
Set Date
Initial activation
›
Set Units
requires basic set-up
›
Set Time Format
Display Design ›
Button Functions on the Surface
BUTTONS
TOP LEFT
BUTTON
(Light)
Press
Adds numerical values
The act of pressing and releasing Backlight
Toggles up to the previous menu
one of the buttons
Press-and-hold
From main time & date display:
The act of pressing and holding shows the selected Dive Mode
N/A
one of the buttons for 1 second
From selected dive mode
before release display: starts swim mode
Button Functions during Diving
Press
The act of pressing and releasing Backlight Scrolls through dive displays
one of the buttons
Press-and-hold In "timer" display: stop / restart
timer (SCUBA and GAUGE mode)
The act of pressing and holding
N/A
one of the buttons for 1 second Reset average depth counter
before release
A1
QUICK USE GUIDE
Settings › Watch Set Time +/UP or -/Down to Select Hours & Minutes
› ›
Settings › Watch › Set Date › +/UP or -/Down to Select Month, Day & Year
Settings › User › Units › +/UP or -/Down to Select Measurement Units
Settings › Watch › Format › +/UP or -/Down to Select Time & Date Format
Settings › Watch › Design › +/UP or -/Down to Select Time Display Design
TOP RIGHT BOTTOM RIGHT
BOTTOM LEFT BUTTON
BUTTON BUTTON
(+/UP) (-/DOWN)
Subtracts numerical values Access main menu and submenus
Toggles down to the next menu Confirm selection / setting
Return to previous menu or cancel the setting
From main time & date display:
From main time & date display when SCUBA
Shortcut to dive ready mode
mode selected: shows current gas settings
Scrolls through dive displays
Reset timer when stopped
(SCUBA & GAUGE mode)
In "surface interval" display:
end Apnea exercise (APNEA mode)
In "surface interval" display:
end Apnea exercise (APNEA mode)
(GAUGE mode)
(SEL/ESC)
N/A