Table of Contents
Advertisement
Angle.
The angle of the weeder tines is adjusted by means of
the handle on the harrow frame. Heavy soil
requires aggressive adjustment of the tines.
The harrow frames has to be horizontal.
During work this is being adjusted by means
of the spindles for the bearing wheels. (See fig. 6).
Adjusting side frames.
When the harrow is lifted, the side frames should hang a
little otherwise you have to adjust the stop screws. (See
fig. 4).
Info:
Speed:
Maintenance:
Lubrication:
Storage:
Weeder/Weeder HD
The best speed is 3-10 mph
Important! Tighten all bolts and
after a few hours use. Further
tightening should be carried out
at regular intervals
Spindle regulators, bearings for
harrow sections and bearings for
side sections.
Clean the harrow. Raise the
harrow section free of the ground
so that the weight of the harrow is
taken by the wheels and the
supporting jack.
Fig. 3
Security chain for side frames.
Fig. 4
Adjustable stop for side frames.
Fig. 5
The support jacks are placed in the
tubes (1), before the side frames are
folded down.
8
13-05-2013
1
Advertisement
Table of Contents
