Table of Contents
Advertisement
XR1045
Warning
Hydraulic attachments have a
maximum hydraulic pressure
rating. Failure to make sure the
attachment is equipped with
a pressure reducing valve, or is rated to be equal or
greater than 3,500 psi (241 bar), which is the maximum
pressure of the forklift auxiliary hydraulic system at
the quick-disconnect couplers, could result in death or
serious injury.
When the auxiliary attachment control lever is moved
right or left it activates hydraulic pressure through the
quick attach couplers to move the carriage
Figure 7-20. Quick Attach Couplers For Hydraulic Systems.
(A) Female Coupler. (B) Male Coupler.
For information call (800) 497-1704
Quick Attach System
This forklift includes a quick attach system that allows
for easy attachment changes Perform attachment
connection and removal procedures on level ground
Attachment Connection
Warning
Improper connection of an auxiliary
attachment can result in death or serious
injury. Attachments not locked into place
could become unstable and fall on the
operator or other personnel near the forklift, which
could result in death or serious injury.
• Make sure attachment locking devices are always in
place.
• DO NOT operate the forklift until you have positive
indication that the quick attach pin and lock lever
are fully engaged.
1. Position the forklift directly behind the attachment
NOTE: Allow enough distance to extend the boom
approximately 18 to 20 inches (0 46 to 0 5 meters)
Figure 7-21. Position Quick Attach Adapter In Line With Attachment.
Operation
Page 59
Advertisement
Table of Contents
