Slim Select Bay Module - Toshiba Tecra M1 Maintenance Manual

4.6 Slim Select Bay Module

4.6 Slim Select Bay Module
Removing the Slim Select Bay Module
To remove the slim select bay module, follow the steps below and refer to figures 4-7 and 4-8.
CAUTION: The slim select bay module can become hot with use. Be careful when
removing the module.
1. Remove the following screw securing the slim select bay module from the screw hole for
lock, and tighten the removed screw in the screw hole for release. (The slim select bay is
unlocked.)
M2.5 4
TECRA M1 Maintenance Manual (960-436)
FLAT HEAD screw
4 Replacement Procedures
1
4-21