Page 1 Satellite M100 TOSHIBA Satellite M100 Series User's Manual...
Page 2 © 2006 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
Page 3: Safety Instructions
iLINK is a trademark of Sony Corporation. TruSurround XT, WOW HD, Circle Surround Xtract, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT, WOW HD, Circle Surround Xtract, TruBass, SRS 3D, Definition and FOCUS technologies are incorporated under license from SRS Labs, Inc.
Page 4 Before you connect the computer to a power source, ensure that the voltage rating of the AC adapter matches that of the available power source. 115 V/60Hz in most of North and South America and some Far Eastern countries such as Taiwan. 100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan.
Page 5 To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. Satellite M100...
Page 6: Fcc Information
Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's external monitor port, parallel port, USB port and microphone jack.
Page 7 EU Declaration of Conformity TOSHIBA declares, that the product: Satellite M100 conforms to the following Standards: This product is labelled with the CE Mark in accordance with the related European Directives, notably Electromagnetic Compatibility Directive 89/ 336/EEC for the notebook and the electronic accessories including the...
Page 8 Following information is only for EU-member states: The symbol indicates that this product may not be treated as household waste. Please ensure this product is properly disposed as inappropriate waste handling of this product may cause potential hazards to the environment and human health. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Page 9 Panasonic CD-RW/DVD-ROM UJDA770TBE-W The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Page 10 TOSHIBA Samsung Storage Technology Korea Corporation CD-RW/DVD-ROM TS-L462D The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 11 Pioneer DVD Super Multi DVR-K17TBS The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Page 12 Panasonic DVD Super Multi UJ-850UTJH-A The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Page 13 Hitachi-LG Data Storage, Inc. DVD Super Multi GSA-T10N The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 14 International Precaution CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station."...
Page 15 ADVARSEL: Denne mærking er anbragt udvendigt på apparatet og indikerer, at apparatet arbejder med laserstråler af klasse 1, hviket betyder, at der anvendes laserstrlier af svageste klasse, og at man ikke på apparatets yderside kan bilve udsat for utilladellg kraftig stråling. APPARATET BOR KUN ÅBNES AF FAGFOLK MED SÆRLIGT KENDSKAB TIL APPARATER MED LASERSTRÅLER!
Page 16: Region Selection
Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
Page 17 Redial Up to two redial attempts can be made. If more than two redial attempts are made, the modem will return Black Listed. If you are experiencing problems with the Black Listed code, set the interval between redials at one minute or longer.
Page 18: Telephone Company Procedures
When you are notified, you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation. Disconnection...
Page 19 Instructions for IC CS-03 certified equipment 1. NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction.
Page 20 Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia.
Page 21 Notes for use of this device in New Zealand The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers.
Page 22: General Conditions
The preferred method of dialing is to use DTMF tones (ATDT...) as this is faster and more reliable than pulse (decadic) dialing. If for some reason you must use decadic dialing, your communications program must be set up to record numbers using the following translation table as this modem does not implement the New Zealand "Reverse Dialing"...
Page 23: Important Notice
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
Page 24 This product and the supplied accessories are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if accessories or cables not manufactured / distributed by TOSHIBA are connected or implemented. To avoid in general EMC...
Page 25: Working Environment
Any consequences resulting from the use of this product in working environments that are not approved or the use is restricted are not the responsibility of Toshiba Corporation. The consequences of the use of this product in those working environments may be:...
Page 26: Wireless Lan And Your Health
Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Page 27: Usage Restrictions
Usage Restrictions Do not use the Wireless Products for controlling the following equipment: Equipment directly linked with human life corresponding to the following. Medical equipment such as life support systems, equipment used in operations, etc. Exhaust systems for gases such as poisonous gas etc. and exhaust systems for smoke.
Page 28 Warning Turn OFF the Wireless Communication switch of wireless products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles.
Page 29: Table Of Contents
Special features ........1-9 TOSHIBA Value Added Package ......1-11 Utilities and Applications .
Page 30 TOSHIBA ..4-27 TOSHIBA Disc Creator....... . 4-30 Media Care.
Page 31 Hardware and system checklist......9-3 TOSHIBA support ........9-19 Chapter 10 Disclaimers CPU .
Page 32 Appendix A Specifications Appendix B Display Modes Appendix C AC Power Cord and Connectors Glossary xxviii Satellite M100...
Page 33 Satellite M100 Preface Congratulations on your purchase of the Satellite M100 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Satellite M100 computer.
Page 34: Preface
Chapter 6, Power and Power-Up Modes, gives details on the computer's power resources. Chapter 7, HW Setup, introduces you to the TOSHIBA Hardware Setup program. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn't seem to be working properly.
Page 35: Conventions
Preface Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer.
Page 36: Equipment Checklist
Preface Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read.
Page 37 TOSHIBA. SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memoory Utilities. When uninstalling the SD utilities, click Start -> Control Panel -> Uninstall a program, and select TOSHIBA SD Memory Utilities. Documentation...
Page 38 Preface xxxiv Satellite M100...
Page 39: Chapter 1 Satellite M100 Features
Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Features Please visit your region's web site for the configuration details of the model...
Page 40 Satellite M100 Features Chip Set ® Intel 945PM Express Chipset or ® Intel 945GM Express Chipset Realtek ALC861 Audio codec TI PCI7412 for Multiple Digital Media Card Slot, IEEE 1394 and PCMCIA controller. ® Intel 82562GZ for 10/100Mbps LAN controller ®...
Page 41 Satellite M100 Features Video RAM Depending on the model you purchased: Up to 256MB integrated solution and shared with ® main memory for Mobile Intel 945GM Express Chipset 64MB or 128MB for local cache for ATI Mobility™ ® Radeon X1300 with HyperMemory™ 64MB,128MB or 256MB for local cache for ATI ®...
Page 42 Satellite M100 Features Power Battery Pack 6-cell Lithium Ion smart battery pack with 43.2 watt capacity (10.8V/4000mAH) or 9-cell Lithium Ion smart battery pack with 64.8 watt capacity (10.8V/6000mAH) or 12-cell Lithium Ion smart battery pack with 92.88 watt capacity (10.8V/8600mAH) (Battery type depends on the model purchased.) Approximately 12 hours or longer charging time to 100% battery capacity with system switched...
Page 43 Satellite M100 Features Display 14.1” WXGA TFT screen with a resolution of 1280 horizontal x 800 vertical pixels 14.1" WXGA+ TFT screen with a resolution of 1440 horizontal x 900 vertical pixels Disclaimer (LCD) For more information on the Disclaimer regarding LCD, please refer to the Disclaimers section in Chapter 10.
Page 44 Satellite M100 Features Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Disclaimers section in Chapter 10. CD-RW/DVD-ROM Some models are equipped with a full-size CD- drive RW/DVD-ROM module that lets you record data to rewritable CD/CD-RWs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adapter.
Page 45 Satellite M100 Features DVD Super Multi Some models are equipped with a full-size DVD drive with double Super Multi drive module with double layer layer disc recording support that lets you record data to rewritable CD/ support DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adapter.
Page 46 Satellite M100 Features Ports (depending on configuration) External monitor 15-pin analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has 4 Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports).
Page 47: Special Features
Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Key combinations that let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
Page 48 Satellite M100 Features System Automatic This feature automatically places the system into Sleep/Hibernation either Sleep Mode or Hibernation Mode when there is no input or hardware access for a specified time period. You can specify the time period and select either System Sleep or System Hibernate in the Power Options.
Page 49: Toshiba Value Added Package
Do not remove the battery pack while the computer is in Sleep mode. Data in memory will be lost. TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power Saver provides you with the...
Page 50: Utilities And Applications
Click Start, point to All Programs, point to InterVideo WinDVD then click InterVideo WinDVD. TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find...
Page 51 This has the same function as the Lock button at the bottom of the right pane in the start menu. TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. Satellite M100 1-13...
Page 52: Options
Use either PC4200 or PC5400 compatible memory modules. See your TOSHIBA dealer for details An additional battery pack can be purchased from Battery Pack your TOSHIBA dealer. Use it as a spare or replacement. High capacity battery An additional battery pack can be purchased from pack your TOSHIBA dealer.
Page 53: Chapter 2 The Grand Tour
Satellite M100 Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 54 The Grand Tour DC IN LED The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source. Power LED In normal operating mode, the Power LED is blue. If the system is in Sleep Mode the LED will flash amber, while the LED will be off when the computer is turned off or is in Hibernation Mode.
Page 55: Right Side
The Grand Tour Right side The following figure shows the computer's right side. NIVERSAL ERIAL PTICAL RIVE (USB) P ORTS ECURITY PTICAL RIVE The right side of the computer Universal Serial Bus The Universal Serial Bus (USB 2.0 and 1.1 (USB) Ports compatible) ports enable USB-equipped devices such as keyboards, mice, hard drives, scanners,...
Page 56: Left Side
The Grand Tour Left side The following figure shows the computer's left side. RGB (M .LINK (IEEE 1394) P ONITOR ENTS ULTIPLE IGITAL EDIA NIVERSAL ERIAL (USB) P PC C TV O The left side of the computer * The availability of this feature is dependant on the model you purchased. RGB (Monitor) Port This 15-pin port lets you connect an external video display to the computer.
Page 57: Back Side
The Grand Tour Back side The following figure shows the computer back panel. ODEM NIVERSAL ERIAL (USB) P DC-IN 15V J ORTS LAN J The back side of the computer * The availability of this feature is depending on the model you purchased. Modem Jack In regions where an internal modem is installed as standard equipment, this jack lets you use a...
Page 58: Underside
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. ATTERY ATTERY ATCH ATTERY XPANSION EMORY OCKET The bottom of the computer Battery Pack The battery pack powers the computer when the AC adapter is not connected.
Page 59: Front With The Display Open
The Grand Tour Front with the display open The following figure shows the front of the computer with the display open. To open the display, push the latch on the front of the display and lift it up. Position the display at a comfortable viewing angle. ISPLAY CREEN AUSE...
Page 60 Internet Button Press the Internet button to open your default web brower. The button setting can be changed in TOSHIBA Controls properties. Power Button Press the power button to turn the computer's power on and off. There is an LED inside the power button which shines blue when the system is on.
Page 61 The Grand Tour Next Button Skips forward to the next track, chapter or digital file. Refer to Chapter 4, Operating Basics, for details. (The availability of this function depends on the model you purchased.) Fingerprint Sensor Just by swiping the finger against the fingerprint sensor, the following functions will be enabled: Logon to Windows and access a securityenabled homepage through IE...
Page 62: Keyboard Indicators
The Grand Tour Keyboard Indicators Arrow Mode When the Arrow mode icon lights blue, you can use the keypad overlay (light gray labeled keys) as cursor keys. Refer to the Keypad overlay section in Chapter 5, The Keyboard. Numeric Mode You can use the keypad overlay (light gray labeled keys) for numeric input when the Numeric mode icon lights blue.
Page 63: Writable Discs
The Grand Tour Writable discs This section describes the types of writable discs. Check the specifications for your drive to for the type of discs it can write. Use Record Now! to write compact discs. Refer to Chapter 4, Operating Basics. CD-R discs can be written only once.
Page 64 The Grand Tour DVD Super Multi drive with double layer disc recording support The full-size DVD super multi drive module lets you record data to rewritable discs as well as run either 12cm (4.72") or 8cm (3.15") discs without using an adapter.
Page 65 See Chapter 6, Power and Power-Up Modes, for details. The AC adapter Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 15 volts DC.
Page 66 The Grand Tour 2-14 Satellite M100...
Page 67: Chapter 3 Getting Started
Satellite M100 Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Setting up your work space - for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
Page 68: Placement Of Computer
Getting Started General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. Make sure there is adequate space around the computer for proper ventilation. Make sure the AC power cord connects to an outlet that is close to the computer and easily accessible.
Page 69: Seating And Posture
Getting Started Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Posture and positioning of the computer Place your chair so that the keyboard is at or slightly below the level of your elbow.
Page 70: Work Habits
Getting Started Work habits A key to avoiding discomfort or injury from repetitive strain is to vary your activities. If possible, schedule a variety of tasks into your work day. If you must spend long periods at the computer, finding ways to break up the routine can reduce stress and improve your efficiency.
Page 71: Connecting The Ac Adapter
100 to 240 volts and 50 or 60 hertz. For details on using the AC adapter to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 15 volts DC.
Page 72: Opening The Display
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Push the display latch on the front of the computer. Opening the display 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.
Page 73: Starting Up For The First Time
Getting Started Starting up for the first time When you first turn on the power, the computer's initial screen is the Windows Vista™ Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen.
Page 74: Sleep Mode
Getting Started Sleep Mode If you do have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode data is maintained in the computer’s main memory so that, when you turn on the power again, you can continue working right where you left off When the AC adaptor is connected, the computer will go into Sleep...
Page 75: Hibernation Mode
Getting Started Executing Sleep Mode You can enter also Sleep Mode by pressing Fn + F3 - please refer to Chapter 5, The Keyboard, for further details. Youu can enter Sleep Mode in one of three ways: 1. Click Start then click the arrow button ( ) located in the power management buttons ( ), or click the arrow button...
Page 76: Starting Hibernation Mode
Getting Started Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: Saves Data to the hard disk drive when the computer automatically shutsdown because of a low battery condition. You can return to your previous working environment immediately when you turn on the computer.
Page 77: Restarting The Computer
Getting Started Restarting the computer Certain conditions require that you reset the computer, for example if: You change certain computer settings. An errors and the computer does not respond you your keyboard commands. If you need to restart the computer, there are three ways this can be achieved: 1.
Page 78: Restoring The Preinstalled Software From The Product Recovery Disc
2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. 3. Use the up or down cursor key to select the CD-ROM/DVD drive in the display menu.
Page 79: Chapter 4 Operating Basics
Satellite M100 Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad To use the TouchPad, simply move your finger tip across it in the direction you want the on-screen pointer to go.
Page 80: Using The Fingerprint Sensor
Operating Basics Press the left button to select a menu item or to manipulate text or graphics designated by the pointer. Press the right button to display a menu or other function depending on the software you are using. Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against it.
Page 81: How The Swipe The Finger
Operating Basics How the Swipe the Finger Using the following steps when swiping fingers for FingerPrint registration or authentication will help to minimize authentication failures: 1. Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you.
Page 82: Points To Note About The Fingerprint Sensor
Operating Basics Points to note about the FingerPrint Sensor Please be aware of the following considerations when using the FingerPrint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, FingerPrint recognition problems or a lower FingerPrint recognition success rate.
Page 83 Toshiba does not guarantee that the FingerPrint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this FingerPrint recognition software or utility.
Page 84: Points To Note About The Fingerprint Utility Software
Operating Basics Points to note about the FingerPrint Utility software You are able to backup saved FingerPrint data and information within the PasswordBank by using the import or Export User Data facility under the FingerPrint management software. However, please be aware that any encrypted files cannot be backup within FileSafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes.
Page 85: Window Logon Via Fingerprint Authentication
Operating Basics 3. At the User’s Password screen which is then displayed, you should ensure that the same Windows username is displayed before entering the appropriate password into the Enter you password field. Once this has been done, click Next. 4.
Page 86: How To Enable Fingerprint Power-On Security Settings
Using this process will switch the password input screen across to the keyboard based entry screen. You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the FingerPrint Power-on Security and its extended function to allow FingerPrint to be used to access the computer when it is turned on.
Page 87: Fingerprint Utility Limitations
TOSHIBA does not guarantee that the FingerPrint utility technology will be completely secure or error-free or it will be accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the FingerPrint software.
Page 88: Using The Internal Modem
1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA > Networking. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect.
Page 89: Properties Menu
Operating Basics 3. Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed. A check will appear next to the currently selected region and telephony location.
Page 90: Modem Selection
Operating Basics Modem Selection If the computer cannot recognize the internal modem, a dialog box is displayed. Select the COM port for your modem to use. Dialing Properties Select this item to display the dialing properties. If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select Japan region mode.
Page 91: Lan
Operating Basics Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. Disconnect the cable from the computer in the same manner. The computer is equipped with networking hardware that supports Ethernet LAN (10megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second and Gigabit Ethernet LAN (1000BASE-T).
Page 92: Wireless Lan
Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.
Page 93: Bluetooth Wireless Technology
TOSHIBA 1. Install: On Windows2000/Windows XP or Windows Vista™, Bluetooth™ Stack for Windows by TOSHIBA does not have a digital signature. 2. Fax application software: Regarding FAX application software, there are some software that you cannot use on this BluetoothTM Stack.
Page 94: Using Optical Disc Drives
The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http:// www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the United States. Wireless communication switch You can enable or disable the wireless LAN function with the on/off switch.
Page 95 Operating Basics Loading optical disc media To load a disc, follow the steps below. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly. JECT BUTTON Pressing the eject button b. Pressing the eject button will not open the drawer when the computer's power is off.
Page 96 Operating Basics 3. Grasp the drawer gently and pull until it is fully open. Pulling the drawer open 4. Lay the disc, label side up, in the drawer. Inserting a disc Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction.
Page 97: Removing Compact Discs
Operating Basics Closing the drive drawer Removing compact discs To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it.
Page 98 2. "Button Support" white card fully appears. After double click this card, the dialog for changing button function is displayed. 3. Change function of Buttons. TOSHIBA Button Support CD/DVD play control buttons In addition to the power button, the following four buttons control functions...
Page 99: Writing Cds On A Cd-Rw/Dvd-Rom Drive
DVD-ROM drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: Damage to any CD-R/-RW disc that may be caused by writing or rewriting with this product.
Page 100: When Writing Or Rewriting
Operating Basics TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.
Page 101: Writing Cds/Dvds On A Dvd Super Multi Drive Supporting Double Layer Disc Recording
TOSHIBA Disc Creator, licensed by Sonic Solutions. Ulead DVD ® MovieFactory for TOSHIBA, which is a product of Ulead Systems, Inc. Important message Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM media, read and follow all set-up and operating instructions in this section.
Page 102: Before Writing Or Rewriting
Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 103 Operating Basics If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it. The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is affected by the quality of the disc and the way it is used.
Page 104 Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. Writing with software other than TOSHIBA Disc Creator or Ulead DVD ®...
Page 105: When Using Ulead Dvd Moviefactory ® For Toshiba
How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA - >Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.
Page 106 Operating Basics Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped. When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data.
Page 107: Toshiba Disc Creator
+RW to CD-R/RW using TOSHIBA Disc Ceator TOSHIBA Disc Ceator cannot record in packet format. You might not be able to use the Disc Backup function of TOSHIBA Disc Ceator to backup a DVD-R/-RW or DVD+R/+RW disc that was made with other software on a different DVD-R/-RW or DVD+R/+RW recorder.
Page 108: Media Care
Operating Basics Data Verification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD. 1. Display the setting dialog box by one of the following two steps: Click the setting button ( ) for writing on the main toolbar in the Data CD/DVD mode.
Page 109: Discs
Operating Basics Discs 1. Store your discs in the container they came in to protect them and keep them clean. If a disk is dirty, do not use cleaning fluid. Clean it with a soft damp cloth. 2. Do not slide back the disc’s protective metal covering or touch the disc's magnetic surface.
Page 110: Setting Up More Than One Display
Operating Basics Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors. The Display Properties window allows you to adjust more precisely the relative positioning of the two displays when they are configured as an extended desktop.
Page 111: Moving The Computer
Operating Basics Never spray cleaner directly onto the computer or let liquid run into any part of it. Never use harsh or caustic chemical products to clean the computer. Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation.
Page 112 Operating Basics 4-34 Satellite M100...
Page 113: Chapter 5 The Keyboard
Satellite M100 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.
Page 114: F1 ... F12 Function Keys
Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Page 115: Hotkeys
The Keyboard Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Mute Turns the volume on and off. Fn + F1 Lock Enters "Lock computer" mode. To restore your desktop, you need to log on again. Fn + F2 Power Plan Mode Displays the power save modes and lets you change the power settings...
Page 116: Windows Special Keys
The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows Vista™. One activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows Vista™ Start menu This key has the same function as the secondary mouse button.
Page 117: Numeric Mode
The Keyboard Numeric mode To turn on the Numeric mode, press Fn + F11 (Numeric mode indicator lights). Now try numeric data entry using the keys below. Press Fn + F11 again to turn off the overlay. The numeric keypad overlay (U.S.) Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay:...
Page 118: Generating Ascii Characters
The Keyboard Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn. 2. Check the keyboard indicators. Pressing Fn turns on the most recently used overlay.
Page 119: Chapter 6 Power And Power-Up Modes
Satellite M100 Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Page 120 Power and Power-Up Modes Power on Power off (no operation) AC adapter Battery • Operates capacity is • LED: Battery off connected above low DC IN off battery trigger point Battery • Operates capacity is • Alarm sounds (this below low function depends on how battery trigger the computer is...
Page 121: Power Indicators
Power and Power-Up Modes Power indicators As shown in the above table, the Battery, DC IN and Power indicators alert you to the computer's operating capability and battery charge status Battery indicator Check the Battery indicator to determine the status of the battery. The following indicator lights indicate the battery status.
Page 122: Battery Types
Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.
Page 123: Care And Use Of The Battery Pack
3. Set correct time and date. If you still see the error message after performing the above actions, please contact your TOSHIBA service representative. Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack.
Page 124 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture.
Page 125 Power and Power-Up Modes 5. Charge the battery pack only in an ambient temperature between 5 and 30 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate and the battery life might be shortened. 6. Be sure to monitor the remaining battery power. If the battery pack or real time clock battery discharge completely, Sleep Mode will not function, and data in memory will be lost, and the computer might register an incorrect time and date.
Page 126: Charging The Batteries
Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low, the Battery indicator flashes amber indicating that only a few minutes of battery power remain. If you continue to use the computer while the Battery indicator flashes, the computer enables Hibernation mode (so you don't lose data) and automatically turns off.
Page 127: Monitoring Battery Capacity
Power and Power-Up Modes Once a battery pack is fully charged, it is recommended that you operate the computer only on battery power until the battery pack completely discharges. Doing so extends battery life and helps ensure accurate monitoring of battery capacity. The Battery indicator may show a rapid decrease in battery operating time when you try to charge a battery under the following conditions: The battery has not been used for a long time.
Page 128: Maximizing Battery Operating Time
Power and Power-Up Modes Maximizing battery operating time A battery's usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: How you configure the computer (for example, whether you enable battery power saving options).
Page 129: Replacing The Battery Pack
Power and Power-Up Modes Retaining data with power off (sleep mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 2 days (Sleep mode, 12-cell) Approximately 1.5 days (Sleep mode, 9-cell) Approximately 1 days (Sleep mode, 6-cell) Approximately 1 month (Shut down mode, all) RTC battery...
Page 130 Power and Power-Up Modes 6. Unlock the Battery Pack Lock. Removing the battery pack-1 7. Slide the battery pack latch to the left, then pull the battery out of the battery bay. Removing the battery pack-2 6-12 Satellite M100...
Page 131: Installing The Battery Pack
The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer.
Page 132: Toshiba Password Utility
TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Password Utility are different from the Windows login password. User Password To start the utility, point to or click the following items:...
Page 133: Power-Up Modes
Power and Power-Up Modes To enter a password manually, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started. The following message will appear in the LCD: Enter Password [xxxxxxxx] At this point, the hotkeys Fn + F1 to F9 do not work. They will function after you enter the password.
Page 134 Power and Power-Up Modes 6-16 Satellite M100...
Page 135: Chapter 7 Hw Setup
Satellite M100 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, CPU, Boot Priority, Keyboard, LAN, and USB.
Page 136 HW Setup General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. When finish BIOS update , please restart your computer and press F2 into BIOS setup manual and load BIOS default one time Password This tab allows you to set or reset the user password for power on.
Page 137: Boot Priority
HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: Selects the USB floppy disk drive. Selects the Network.
Page 138 HW Setup Wake-up on LAN This feature lets the computer's power be turned on when it receives a wake- up signal from the LAN. Enabled Enables Wake-up on LAN. Disabled Disables Wake-up on LAN (Default). The Wake-up LAN function support AC adapter mode only, before you plan to use this function please make sure your AC power source is connected to system properly.
Page 139: Chapter 8 Optional Devices
Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory PC card Memory modules Power devices...
Page 140: Pc Card
The computer is equipped with a PC Card expansion slot that can accommodate one 5 mm Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC Cards, including PC Card 16's multifunction card and CardBus PC Cards.
Page 141: Removing A Pc Card
Optional Devices Removing a PC card 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Click the PC Card you want to remove. 3. Press the eject button of the PC Card to extend it. 4. Press the extended eject button to pop the card out slightly. 5.
Page 142: Sd/Mmc/Ms/Ms Pro/Xd Memory Cards
Optional Devices SD/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory. Card Type Capacities 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB,...
Page 143: Installing A Memory Card
Optional Devices Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Be sure the memory card is oriented properly before you insert it. If Windows fails to read the card, remove it then reinsert it.
Page 144: Removing A Memory Card
Optional Devices Removing a memory card To remove a memory card, follow the steps below: 1. Click the Safely Remove Hardware icon on the Taskbar. 2. Select a device, then click the Stop button. A confirmation dialog may appear, depending on how the device is registered with the system; if so, confirm that you want to remove the device.
Page 145: Memory Expansion
CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products. Insert the two memory modules of the same specifications and capacity into Slot A and Slot B respectively.
Page 146 Optional Devices Installing Memory on Bottom Side If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Follow these steps to install a memory module: 1.
Page 147 Optional Devices Installing a module 8. Seat the cover and secure it with the screw. 9. Replace the battery pack as described in Chapter 6, Power and Power- Up Modes. 10. Turn the power on and make sure the added memory is recognized. Removing Memory on Bottom Side If you use the computer for a long time, the memory modules will become hot.
Page 148 Optional Devices Removing the memory module 6. Seat the cover and secure its screw. 7. Replace the battery. Installing Memory Under Keyboard If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them.
Page 149 Optional Devices Pay attention not to give a damage on LCD panel when pushing up keyboard cover. HOOK HOOK HOOK HOOK HOOK 150~170 Removing keyboard cover Removing keyboard cover 6. Loosen the two screws securing the keyboard. 7. Push the Center of the keyboard, press the tab 8.
Page 150 Optional Devices M2XA M2XA Removing keyboard 9. Loosen the two shield cover screws. 10. Remove the shield cover. 11. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection.
Page 151 Optional Devices M2XA M2XA Installing memory module M2XA M2XA Installing shild cover 14. Flip keyboard back and secure it with screws. 15. Replace the keyboard cover. Make sure all hooks are secured . 16. Replace the battery pack as described in Chapter 6, Power and Power Up Modes.
Page 152 Optional Devices Removing Memory Under Keyboard If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. To remove the memory module, make sure the computer is in boot mode then: 1.
Page 153: Additional Battery Pack
Optional Devices Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. See Chapter 6, Power and Power-Up Modes.
Page 154: Television
Optional Devices Television A television can be connected to the video out port on the computer. To connect a television, follow the steps below. 1. Turn the computer off. 2. Use a video cable (not supplied) to connect the television to the video out port.
Page 155 Optional Devices 4. Click the Graphics Properties button. 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. Satellite M100 8-17...
Page 156 Optional Devices For ATI 1. Click Start >Control Panel >Appearance and Personalization> Personalization. 2. Choose Display setting. 8-18 Satellite M100...
Page 157: I.link (Ieee1394)
Optional Devices 3. Click the ATI Catalyst Control Center button. 4. Setup your television and notebook displays. i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as: Digital video cameras Hard disk drives MO drives Optical disc drives i.LINK uses a four-pin connector, which does not carry electric current.
Page 158: Security Lock
Optional Devices Connecting 1. Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394) cable into the computer. 2. Plug the other end of the cable into the device. Note the following when you use i.LINK: You may need to install drivers for your i.LINK devices. Not all i.LINK devices have been tested.
Page 159: Chapter 9 Troubleshooting
Satellite M100 Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
Page 160: Preliminary Checklist
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. Make sure you turn on all peripheral devices before you turn on the computer.
Page 161: Hardware And System Checklist
Troubleshooting Software The problems may be caused by your software. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.
Page 162: Self Test
If any of the following conditions are present, the self test failed: The computer stops and does not proceed to display information or messages except the TOSHIBA logo. Random characters appear on the screen, and the system does not function normally.
Page 163: Overheating Power Down
Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.
Page 164 Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 6, Power and Power-Up Modes. Problem Procedure Battery doesn't power The battery may be discharged.
Page 165: Lcd Panel
Troubleshooting Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers. selected. Press Fn + F10 and try typing again. Output to screen is Make sure the software you are using is not garbled. remapping the keyboard. Remapping involves reassigning the meaning of each key.
Page 166 Troubleshooting Password Problem Procedure Cannot enter Refer to Chapter 6, Power and Power-Up Modes. password i.LINK (IEEE1394) Problem Procedure i.LINK device does not Make sure the cable is securely connected to the function computer and to the device. Make sure the device's power is turned on. Reinstall the drivers.
Page 167: Sound System
Troubleshooting Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor's power switch is on. Confirm that the external monitor's power cable is plugged into a working power outlet.
Page 168: Pointing Device
Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. TouchPad Problem Procedure On-screen pointer does The system might be busy. If the pointer is shaped not respond to Pad as an hourglass, wait for it to resume its normal operation...
Page 169: Tv Output Signal
Troubleshooting Problem Procedure The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility. slow 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3.
Page 170 Troubleshooting Problem Procedure Cannot access LAN or Check for a firm cable connection between the the Wake up on LAN LAN hub. feature does not work Make sure the AC adapter is connected. You cannot access a LAN using the computer's battery power.
Page 171 Troubleshooting Modem Problem Procedure Communication Make sure the computer's internal modem software can't initialize settings are correct. Refer to Phone and Modem the modem Options Properties in the Control Panel. You can hear a dial tone If the call is going through a PBX machine, make but can't make a call sure the communication application's tone dial detection feature is disabled.
Page 172 Troubleshooting CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive's drawer is securely closed. disc in the drive Press gently until it clicks into place. Open the drawer and make sure the disc is properly seated.
Page 173 Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.
Page 174 Troubleshooting Problem Procedure Some discs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware configuration matches your software's needs. Check the disc's documentation. Check the type of disc you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video...
Page 175: Disk Drive
DVD Super Multi drive. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.
Page 176: Real Time Clock
1. Make sure you have enroll finger in windows Fingerprint Power on account. Security does not work 2. Set the User Password by using TOSHIBA Password Utility and restart the system. 3. Make sure place a checkmark in Replace the power-on and hard drive passwords with the fingerprint reader on the Protector Suite QL setting.
Page 177: Toshiba Support
Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
Page 178: Where To Write
Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia Germany & Austria TOSHIBA (Australia) Pty, Ltd.
Page 179: Chapter 10 Disclaimers
For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact Toshiba technical service and support, refer to TOSHIBA support section in Chapter 9 Troubleshooting for more information. User’s Manual...
Page 180: Memory (Main System)
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Page 181: Hdd Drive Capacity
Disclaimers HDD Drive Capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.
Page 182: Copy Protection
Disclaimers Copy Protection Copy protection technology included in certain media may prevent or limit recording or viewing of the media. Images All images are simulated for purposes of illustration. LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.
Page 183: Specifications
Satellite M100 Appendix A Specifications This appendix summarizes the computer's technical specifications. Dimensions 343mm x 242mm x 38mm 36.5mm 242mm 29.8mm 29.8mm 38mm 36.5mm User’s Manual...
Page 184: Environmental Requirements
Specifications Weight Starting at 2.36kg/5.20lbs* * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Ambient temperature Relative humidity 5°C to 35°C 20% to 80% Operating Non-operating -20°C to 65°C Conditions Altitude (from sea level) Operating -30 to 10,000 feet Non-operating...
Page 185 Specifications Built-in Modem Some computers in this series are equipped with Modem functionality. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer's speaker Communication specifications Communication...
Page 186 Specifications Satellite M100...
Page 187: Display Modes
Satellite M100 Appendix B Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen.
Page 188: Displaying Movies On A Tv Or Crt
Display Modes Some of display mode might not be supported depending on the external monitor which you use. Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor.
Page 189 Display Modes 3. Click the Advanced Setting button. The (Multiple Monitors) and ® Mobile Intel 945GM Express Chips dialogue box opens. 4. Click the Graphics Properties button. Satellite M100...
Page 190 Display Modes 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. For ATI 1. Click Start >Control Panel >Appearance and Personalization> Personalization. 2. Choose Display setting. Satellite M100...
Page 191 Display Modes 3. Click the ATI Catalyst Control Center button. 4. Setup your television and notebook displays. Satellite M100...
Page 192 Display Modes Satellite M100...
Page 193: Ac Power Cord And Connectors
Satellite M100 Appendix C AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Minimum 1.7 meters Length:...
Page 194 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2- 15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U.
Page 195 Satellite M100 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit CRT: cathode ray tube...
Page 196 Glossary SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA: wide extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
Page 197 Glossary capacity: The amount of data that can be stored on a magnetic storage device such as a floppy disk or hard disk. It is usually described in terms of kilobytes (KB), where one KB = 1024 bytes and megabytes (MB), where one MB = 1024 KB.
Page 198 Glossary DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value.
Page 199 Glossary gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. graphics: Drawings, pictures, or other images, such as charts or graphs, to present information. hard disk: A non-removable disk usually referred to as drive C. The factory installs this disk and only a trained engineer can remove it for servicing.
Page 200 Glossary Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing- side coating is etched into character forming segments with leads that extend to the edge of the glass. Applying a voltage between the glass sheets alters the brightness of the liquid crystal.
Page 201 Glossary parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even.
Page 202 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.

This manual is also suitable for:

Satellite m100 series

Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz User Manual

Preface

Chapter 1 Satellite M100 Features

Chapter 2 The Grand Tour

Chapter 3 Getting Started

Chapter 4 Operating Basics

Chapter 5 The Keyboard

Chapter 6 Power and Power-Up Modes

Chapter 7 HW Setup

Chapter 8 Optional Devices

Chapter 9 Troubleshooting

Chapter 10 Disclaimers

Quick Links

Related Manuals for Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz

Summary of Contents for Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz

This manual is also suitable for:

Table of Contents