Log Utilities; Function Description; Operations - Toshiba Tecra M1 Maintenance Manual

3 Tests and Diagnostics

3.25 Log Utilities

3.25.1 Function Description

This function logs error information generated while a test is in progress and stores the results in RAM.
This function can store data on a floppy disk or output the data to a printer. If the power switch is turned
off, the error information will be lost. The error information is displayed in the following order:
1. Error count (CNT)
2. Test name (TS-NAME)
3. Subtest number (TS-NAME)
4. Pass count (PASS)
5. Error status (STS)
6. FDD/HDD or memory address (ADDR)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name (ERROR STATUS NAME)

3.25.2 Operations

Selecting 5 and pressing Enter in the DIAGNOSTIC MENU, logs error information into RAM or
onto a floppy disk. The error information is displayed in the following format:
XXXXX ERRORS
CNT TS-NO PASS STS ADDR
001 EXP01 0000 XXX 00000000 00 00 0000
001 EXP03 0000 XXX 00000000 00 00 0000
Pass count
Subtest number
Test name
Error count
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
3-68
WD RD HSTS
Address
Error status
[ERROR STATUS NAME]
FDD-WRITE PROTECTED
FDD-TIME OUT ERROR
HDC status
Read data
Write data
TECRA
M1 Maintenance Manual (960-436)
3.25 Log Utilities
Error status name