Setting The Responder Machine - Toshiba Tecra M1 Maintenance Manual

3 Tests and Diagnostics

Setting the responder machine

NOTE: Release the write-protection of the floppy disk for the test.
Insert a floppy disk containing the test program into the FDD for the responder machine and turn on
the responder machine. The Wireless LAN test menu will appear.
###############################################################
####
###############################################################
*
*
*
*
*
***************************************************************
....Press test number [1,0] ?
Press 0 and Enter in the responder machine. After a while, the following messages will appear. The
latter message is updated ever 3 seconds.
Waiting for transmitter to ring the bell in 11a mode.
Input or output error (EIO) : rxDatBegin : nothing receive within
3000millisecs(waitTime)
The responder machine is ready for the test.
Setting the tester machine
NOTE: Release the write-protection of the floppy disk for the test.
Insert a floppy disk containing the test program into the FDD of the tester machine and turn on the
tester machine. The Wireless LAN test menu will appear.
###############################################################
####
###############################################################
*
*
*
*
*
***************************************************************
....Press test number [1,0] ?
Press 1 and Enter in the tester machine. After a while, the following message will appear:
--------------------------------------------
-
-
-
-
-
3-44
Atheros WLAN sub system repair test
1 .....Test PC [Initiator]
0 .....[Responder]
Atheros WLAN sub system repair test
1 .....Test PC [Initiator]
0 .....[Responder]
mac address check OK !!
...Press any key !!
3.17 Wireless LAN Test (Atheros)
VX.XX
VX.XX
-
-
-
-
-
TECRA M1 Maintenance Manual (960-436
####
*
*
*
*
*
####
*
*
*
*
*
)