Toshiba Tecra M1 Maintenance Manual page 215

3.29 SETUP
Built-in HDD
Second HDD
Built-in HDD
Second HDD
PC Card
PC Card
6. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
NOTE: 1) When starting the computer in Resume mode, the last configuration is
remembered. If data does not appear on the display you are using after
starting in Resume mode, pressing Fn+F5.
2) Pressing Fn+F5 changes the display setting in the order of internal
LCD to simultaneous to external monitor.
(b) TV Type
This option lets you make settings for television display.
NTSC
PAL
7. Others
Whether or not you need to configure the computer with these options depends primarily on
the kind of software or peripherals you use.
(a) Power-up Mode
Use this option to choose between resume and boot mode. This option can also be
set by hotkeys.
Boot
Resume
TECRA M1 Maintenance Manual (960-436)
Second HDD
Built-in HDD
PC Card Second HDD
PC Card Built-in HDD
Built-in HDD Second HDD
Second HDD Built-in HDD
Selects an external monitor if one is connected. Otherwise it
selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor for
simultaneous display.
(Default)
Turns on boot mode. (Default)
Turns on resume mode.
3 Tests and Diagnostics
PC Card (Default)
PC Card
3-87