Kongsberg Simrad AP20 Manual page 96

Simrad AP20 Autopilot
SETUP MENU to provide the user with choices of data sources,
or identified to the AP20 where to look for various types of data.
When you assign a hardware port to an abbreviated name, you
are simply telling the AP20 system that when the user chooses
an abbreviated name as a data source it should look to the
hardware port assigned to the abbreviated name for data.
• Step to the Interface part of the Installation Menu.
The following display will be presented:
To access the Interface Setup items, turn the course knob
clockwise.
The display will show:
94
Language
Dockside
Interface
Seatrial
Parameters
NMEA Test
Display
Master Reset
SW V1R3
May 14 2002
09:38
GPS1 J300X-2
GPS2 -------
LC 1 -------
NAV1 -------
NAV2 -------
WIND J300X-1
INSTR J300X-1
RFC J300X
MAGN -------
FLUX -------
GYRO -------
NMEA -------
Abbreviated Assigned
name HW port
0 00
Input:
-------
J300X-1
J300X-2
NI300-1
NI300-2
NI300-3
NI300-4
HW ports that
can be assigned
No
Yes
20220505H