Instrument Set-Up; Flashing Course Knob Icon - Kongsberg Simrad AP20 Manual

Simrad AP20 Autopilot

Instrument set-up

This screen gives access to the set-up of the Shallow Water
Alarm and the Trip reset. Press and hold the INSTRUMENT
button to activate the screen as shown.
Select item using the STBD [>] button and the course knob to set
the shallow water alarm limit. Also use the course knob to reset
the trip counter.
The shallow water alarm is activated only when digits are
Note !
dialled in.
The setting of the alarm is local. In a multistation system,
however, the setting representing the deepest water limit will
activate the alarm even if this setting is on an "inactive" unit.

Flashing course knob icon

36
INSTRUMENT SETUP
SET SHALLOW
RESET TRIP
When the course knob is used for settings etc., an
icon will flash on the screen to tell that no course
changes can be made unless you press the AUTO
button.
--.--ft
--.--nm
--:--hr
20220505H