Storage and Shipping
78
Cubis
®
MCA Operating Instructions
13 Storage and Shipping
13.1 Storage
Procedure
Turn the device off .
t
Disconnect the device from the power supply .
t
Disconnect the device from all connected devices and all accessories, e .g . printer .
t
Clean the device (see Chapter 9 .2, page 73) .
t
Store the device according to the ambient conditions (see Chapter "15 .7
t
Metrological Data", page 83) .
13.2 Returning Device and Parts
Defective devices or device components can be returned to Sartorius . Returned
devices must be clean, decontaminated, and properly packed, e .g . in the original
packaging .
Transport damage as well as measures for subsequent cleaning and disinfection of
the device or device components by Sartorius shall be charged to the sender .
WARNING
Risk of injury due to contaminated devices!
Devices contaminated with hazardous materials (NBC contamination) will not be
accepted for repair or disposal .
Observe the information on decontamination (see Chapter 14 .1, page 79) .
t
Procedure
Switch off the device .
t
Disconnect the device from the power supply .
t
Disconnect the device from all connected devices and all accessories, e .g . printer .
t
Clean the device .
t
Contact Sartorius Service for instructions on how to return devices or device
t
components (please refer to www .sartorius .com for return instructions) .
Pack the device and the device components properly for return, e .g . in the
t
original packaging .