Installing A Filter Balance With A Metal Ring; Draft Shield; Positioning The Weighing Pan And Associated Components - Sartorius Cubis MCA Series Operating Instructions Manual

1
2
1
2
1
2
Place the weighing pan (1) through the opening in the base of the weighing
t
chamber into the pan retainer .
To mount the weighing pan: Turn the weighing pan slightly while pressing down
t
lightly .
1
For devices with an internal draft shield: Place the internal draft shield on a
t
shield plate .
Center and insert glass draft shield with recess (1) above the snap-in peg (2) .
t
5.8 Installing a Filter Balance with a Metal Ring Draft Shield
5.8.1

Positioning the Weighing Pan and Associated Components

Procedure
For a device with a connector: Place the connector on the base of the weighing
t
chamber .
Place the shield plate (2) on the base of the weighing chamber .
t
Place the metal ring draft shield (1) on the base of the weighing chamber . The
t
inner metal ring of the draft shield must be inserted into the outer metal ring .
Turn the opening of the metal ring draft shield in the direction of the arrows .
t
To mount the metal ring draft shield: Turn the screw (2) .
t
Place the filter pan (1) or the weighing pan through the opening in the shield
t
plate into the pan retainer .
NOTICE The filter pan or weighing pan can be damaged due to improper
t
assembly . To mount the inserted filter pan or weighing pan: Screw in the filter
pan or weighing pan with slight pressure to correctly position it in the pan
retainer .
Installation
Cubis ® MCA Operating Instructions 41