Table of Contents
Advertisement
PST Mode
M1 supports 1 HDMI preview output, and it supports the functions as below:
Signal Selection
Push any button in Input Sources Area, for example, push the button [5], the border of signal 5 will change to
yellow, and the signal in PGM monitor will be changed to signal 5.
Add or Delete Layer
Push any button of [A] to [B] in Layer Selection Area to add or delete the layer.
Add layer: The light is lit.
Select layer: The light is flashing.
Delete layer: The light is off.
Freeze the Layer(N/A, coming soon)
Push the [FREEZE] button in Layer Adjustment Area, the layer will be freeze, push the button again, the layer is
live.
2 Layers Presets
1. Push A or B button in Layer selection Area to select 1 or 2 layouts, including 1P, PIP.
2. User can adjust the position, size for the selected layer, and set DSK, BLEND and MASK, some function
coming soon.
Set the Position
1. Push any button of [A] to [B] in Layer Selection Area, the light is red lit when the layer is selected.
2. Push the [SCALE] button in Layer Adjustment Area, and enter to the menus as follows:
Use the rotary knob to adjust the position of the layer.
Scale and Crop the Layer
1. Push any button of [A] to [B] in Function Selection Area, the light is flashing when the layer is selected.
2. Push the [SCALE] button in Layer Adjustment Area, and enter to the menus as follows:
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
->H Pos
V Pos
H Size
V Size
->H Size
V Size
Reset
Crop H Pos
120
329
1920
1920
1920
1080
>>
11
0
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
