Table of Contents
Advertisement
32
ViA User Manual v3
5.4
Connecting with ISDN
The following procedure will create a custom peer-to-peer ISDN connection program using the
codec's TOUCH SCREEN. Attach an ISDN cable to the ISDN module installed in your codec. The
codec displays ISDN line sync status in the Status Bar at the top of the TOUCH SCREEN.
Symbol
1
No ISDN
Symbol
2
3
1. Press the HOME
2. Tap Menu
Default programs cannot be locked in the codec. Save a program as a custom program if a
program needs to be locked.
3. Tap to select the preferred program connection option, e.g. Default Mono or Default
Stereo, and then tap Done. Note: Tap Load Program to load preconfigured custom
programs.
4. To adjust connection settings tap the Connection Settings
5. Tap Transport to adjust this setting if the current selection is IP.
6. Tap to select ISDN as the preferred connection type.
Description of Status
No ISDN module is installed in the codec.
An ISDN module is installed in the codec and either:
· No ISDN line is attached to the codec, or
· ISDN line is attached but line sync hasn't been detected by the
module
An ISDN module is installed in the codec and line sync has been detected.
button to return to the Home screen, then tap Connections
and then tap Default Programs to view program connection options. Note:
.
symbol.
© Tieline Research Pty. Ltd. 2020
Advertisement
Table of Contents
Need help?
Do you have a question about the Tieline ViA and is the answer not in the manual?
Questions and answers