Table of Contents
Advertisement
20
ViA User Manual v3
2. Tap Menu
Load Program to load preconfigured custom programs. Default programs cannot be locked
in the codec. Save a program as a custom program if a program needs to be locked.
3. Tap to select the preferred program connection option, e.g. Default Mono or Default
Stereo, and then tap Done in the top right-hand corner of the TOUCH SCREEN.
4. With factory default settings the codec is configured to connect over IP. To adjust
connection settings tap the Connection Settings
5. If required, tap Transport and select IP > Tieline Codecs if ISDN or POTS is the currently
configured transport. Note: Select SIP instead of Tieline Codecs when dialing non-Tieline
codecs. Select Sessionless to dial a sessionless IP connection over networks supporting
this connection method.
and then tap Default Programs to view default program options. Note: Tap
symbol.
© Tieline Research Pty. Ltd. 2020
Advertisement
Table of Contents
Need help?
Do you have a question about the Tieline ViA and is the answer not in the manual?
Questions and answers